Cycle X 1062cc Stroker Kit

Pistons:
These 70mm diameter stroker piston kits are designed for 69mm or 70mm crankshafts (63mm is stock) and result in a 1060cc plus displacement. We feel the best way to build a big bore stroker motor is to move the wrist pin holes rather than use shorter connecting rods or spacer plates like people used in the 70's era. These world class pistons are 170 grams (bare weight) and feature our race proven Cycle X domes.


Question:
Are these pistons only for race applications only?
Not really. With the proper camshaft selection and combustion chamber modifications, these kits would make the ultimate "hot street" motor.

Cycle X CB750 F/K BB Stroker 2.756"
Clear: 0.00200 (0.051000mm)
Comp. Ht.: 0.8074
Bore: 2.7559
S525 CW15
2756XA

These kits include our Cycle X big bore sleeves which have become the clear favorite with engine builders. The sleeves are super dense and are some of the longest lasting sleeves in the industry. Most skilled machinists can hear the difference when boring and feel the difference when honing.

Cycle X connecting rods:
Our connecting rods are celebrating their 21st birthday and have a cult following world-wide.
Unbreakable ARP bolts included.

Crankshaft:
69mm Stroker crankshaft.
Best in the industry. Balanced and ready to go with connecting rods installed.

 

ENP-1062     $3,100.00

In stock, call to order (outright sale).

 
 
 
 
 
 
 
 

Honda CB750 Stroker Piston Sets

These 70mm diameter stroker piston kits are designed for 69mm or 70mm crankshafts (63mm is stock) and result in a 1060cc plus displacement. We feel the best way to build a big bore stroker motor is to move the wrist pin holes rather than use shorter connecting rods or spacer plates like people used in the 70's era. These world class pistons are 170 grams (bare weight) and feature our race proven Cycle X domes.

Question:
Are these pistons only for race applications only?
Not really. With the proper camshaft selection and combustion chamber modifications, these kits would make the ultimate "hot street" motor.

Cycle X CB750 F/K BB Stroker 2.756"
Clear: 0.00200 (0.051000mm)
Comp. Ht.: 0.8074
Bore: 2.7559
S525 CW15
2756XA

These kits include our Cycle X big bore sleeves which have become the clear favorite with engine builders. The sleeves are super dense and are some of the longest lasting sleeves in the industry. Most skilled machinists can hear the difference when boring and feel the difference when honing.


ENP-SPS     $989.95

 

 

 

 

If you're in need of tech help, refer to our pistons tech tips page.

 

HOME

Refurbished

Machine Work & Services

Close Out

Honda Hot Rod Motors

Pistons

Gaskets

Git Kits

Cush Drives & Chain Wheels

Crankshafts & Connecting Rods

Valve Trane

Transmissions

Camshafts

Honda CB750 F2 Parts

Engine Chains

Clutches

Cylinder Studs

Carb Systems

Wheels & Accessories

Polishing, Chroming, & Black Chroming

Miscellaneous Parts

Cycle X News

Tech Tips

Apparel & Accessories

Instructions

A 3.99% customer service charge is applied to all phone orders.

If ordering via phone, please also provide the part # of any products you are interested in for faster and more accurate service.

If you encounter a (rare) broken button as you're trying to add parts to your cart (going to PayPal summary instead of your cart or not opening PayPal at all) or anything else of concern, please call us to report it. We'll try to have it fixed for your convenience within the next 5-10 minutes. Afterwards, refresh the page and try again.

NOTE: As of July 1st, 2018, an extended goods and services tax (GST) has been applied to all Australian consumers buying overseas, charging an extra 10% in taxes to us with each purchase. To ensure that you can continue to purchase from us in Australia and we can provide our parts at our usual lower cost, please contact us at the email below if interested in any particular parts so that we can make a special shipping arrangement for you.

 

It is the sole and exclusive responsibility of the purchaser to determine the suitability of any part, product or work for his or her use.
The purchaser shall assume all legal, personal injury risk and liability and all other obligations, duties and risks therewith.
There is no warranty on High Performance products.

Click to go back to our Pistons Page

Cycle X Global Headquarters

6246 US Hwy 51 South

Hazelhurst, WI 54531

Phone: 715-356-7346

Email: hotrodcyclex@gmail.com