Frank Loney. Friend, customer, and Super Eliminator world record holder.

The 970cc pistons and piston kits on this page are designed for various applications and budgets.
Wiseco pistons, our piston coatings, Cycle X developed MLS gaskets and our cylinder sleeves are considered the best in the industry.

 

 

70mm / 970cc Wiseco Coated Piston Set


These piston kits were designed for a customer and we have 2 extra sets for sale.
Depending on your combustion chamber, this kit averages in the higher 10 to 1 ratios with "K" heads.
This ratio would be perfect for larger camshafts that need higher compressions.
The pistons are made by Wiseco and have a bare weight of 165 grams.
They have an Armor-Glide coating on the skirts and a heat repellant coating which drastically reduces piston temperatures.
By the way, the kits are complete with wrist pins, circlips and rings.
The kit also has the best cylinder sleeves in the industry.

 

ENP-970-70     SUPER SALE $749.95

 

 

 

 

Cycle X 970cc (70mm) "K" Model
Manufactured by Wiseco


These 10 1/4 CR pistons come with pistons, rings, circlips and wrist pins only.
Cycle X 970cc piston kits for Honda CB750 K models 69-78'
Note: Complete kits with sleeves and gasket are listed below.

 ENP-970-70K     $559.95

Call for availability

 

 

 

 

Cycle X 970cc Pistons (70mm) 12-1/2 CR "K" Models (Armor Glide Coated)
Manufactured by Wiseco


Designed for "K" models 12 1/2 CR with big valves and camshafts.
Complete kit as shown.

ENP-970-70K-12.5CR     $559.95

 

 



Cycle X 970cc Pistons (70mm) 10-1/4 CR 77-78 "F" Models (Armor Glide Coated)
Manufactured by Wiseco


Complete as shown.

ENP-970-70F-10.25CR     $559.95

  

 


 

Cycle X 970cc (70mm) Pop Top 12.5 CR Top End Kit (Armor Glide Coated)
Cycle X design, Manufactured by Wiseco

Cycle X 970cc kits are complete as shown for Honda K models (69-78)
These 12.5 CR pistons are a must for any big duration cam you are considering.
The Cylinder sleeves are best in the industry (top case boring required)
 MLS head gaskets (financed and tested by Cycle X)
Base gasket (cut out for bigger sleeves)
No leak, no sealer required Valve cover gasket. (another financed and tested product by Cycle X)
Valve seals, "O" rings to complete your go-fast project.

 

ENP-970POP-KIT     $889.95

 

 

 

Cycle X 970cc Kit
Cycle X design, Manufactured by Wiseco


Cycle X 970cc kits for Honda K models (69-78)
Lightest pistons in the industry (169 grams-bare)
10+1/4 compression, MLS Head Gasket, Sleeves
Forged Pistons Rings, Clips, Wrist Pins

ENP-970-KIT     $859.95

Call for availability

 

 

If you're in need of tech help, refer to our pistons tech tips page.

 

HOME

Engine Parts

Machine Work & Services

Exhaust

Carb Systems

Mufflers and Accessories

Refurbished Heads & Cylinders

Frame, Fork Tubes, & Rear Shocks

Electrical & Ignition

Chain & Sprocket

Levers & Cables

Oil Related

Trikes/Trike Frames

Wheels & Accessories

Chrome & Chrome Exchange

Sales Page

Honda CB 500 / 550 Products

DOHC Products

Harley Twin Carb System & Stuff

Speedos & Tachs

Tech Tips

Our Customers

Instructions

Cycle X Drag Bike

Cycle X Racing

If ordering via phone, please also provide the part # of any products you are interested in for faster and more accurate service.

If you encounter a (rare) broken button as you're trying to add parts to your cart (going to PayPal summary instead of your cart or not opening PayPal at all) or anything else of concern, please call us to report it. We'll try to have it fixed for your convenience within the next 5-10 minutes. Afterwards, refresh the page and try again.

 

NOTE: As of July 1st, 2018, an extended goods and services tax (GST) has been applied to all Australian consumers buying overseas, charging an extra 10% in taxes to us with each purchase. To ensure that you can continue to purchase from us in Australia and we can provide our parts at our usual lower cost, please contact us at either email below if interested in any particular parts so that we can make a special shipping arrangement for you.

 

It is the sole and exclusive responsibility of the purchaser to determine the suitability of any part, product or work for his or her use.
The purchaser shall assume all legal, personal injury risk and liability and all other obligations, duties and risks therewith.
There is no warranty on High Performance products.

Click to go back to our Pistons Page

Cycle X Global Headquarters

6246 US Hwy 51 South

Hazelhurst, WI 54531

Phone: 715-356-7346

Email: cyclex@cyclexchange.net (primary) or hotrodcyclex@gmail.com (for sending attachments)