|
MAIN & ROD BEARINGS |
|
Cycle X Rod Bearings Rod bearings available for black, brown, green, and yellow.
Note: You may mix and match bearings
.
GREEN ROD BEARINGS
YELLOW ROD BEARINGS
BROWN ROD BEARINGS
BLACK ROD BEARINGS |
Cycle X Main Bearings Main bearings available for black, brown, green, and yellow. Note: You may mix and match bearings. ENL-016 $159.00 PER SET OF 10
|
|
Dry Film Lubricated Rod and Main Bearings CT-1 is a Dry Film Lubricant coating that helps reduce friction and abrasive wear. It provides intermittent dry lubrication and is not affected by dust or dirt. CT-1 is specifically engineered to withstand the extreme conditions of today's high performance engines. Professional engine builders enjoy a higher level of confidence with increased embedability, strength and durability. CT-1 Dry Film Lubricant coating is applied as a spray process. Different surface preparation methods appropriate for the substrates will be used prior to the coating process. Coating thickness is varied to suit the application. Typical coating thickness for engine bearings is 0.00025" to 0.00030" inch (6 to 7.5 microns). Temp. Rating: Process Temp: 350° (176°C), Max Temp: 500° (260°C), Int. Temp: 600° (315°C)
Thickness: Stories are more fun! A top level
pro-mod drag racer was having connecting rod bearings failures every run
down the drag strip years ago, the con-rod bearings were flattened out and
were clearly junk. The distraught drag racer happened to reach out to our
coating people for answers. Our people provided the pro-mod racer with a set
of "dry film" connecting rod bearings and the machine ran more than 12 runs
that weekend with virtually no signs of wear. Note: |
