Used High Performance Parts

BACK TO HOME PAGE

 

This section will be loaded with preowned high-performance parts we accumulated over the years.

 

cafe stroker crank.JPG (214644 bytes)   Stroker crankshaft and golden rods
 So, here is a Honda sohc Stroker crank and RC engineering golden rods. The rods are shorter and are designed to be used with this crankshaft. 
 
$ 1395.00

cafe 900cc cylinder.JPG (226298 bytes)   900cc Honda cylinder 
 This 66.70 bore cylinder has been sleeved, surfaced, glass beaded, heli coiled and painted.
These cylinders are nice because you will not need to bore your upper engine case. 
You will need to contact your favorite piston manufacturer for some pistons.
$ 499.00 

cafe ard mag 1.JPG (214243 bytes)   ARD mag
 Check out the nice ARD mag for your vintage Honda sohc project. 
$ 799.00

cafe ard mag 2.JPG (215906 bytes) ARD mag
Another ARD mag.
$ 799.00

cafe ard mag 3.JPG (209501 bytes)   ARD mag parts
One more ARD mag for parts. See anything you need ?

cafe 73mm cylinder.JPG (211133 bytes)  73mm Big-Bore cylinder
This Big-Bore cylinder has been glass beaded, surfaced, sleeved for 73mm pistons. 
You will need to contact your favorite piston manufacture for some pistons.
$ 499.00 

71mm cylinder.JPG (212388 bytes)      71mm Big-Bore cylinder
Glass beaded, surfaced and sleeved for 71mm pistons.
You will need to contact your favorite piston manufacture for pistons.
$ 499.00 

used rods set.JPG (318368 bytes)     Carrillo connecting rods 
These Carrillo connecting rods retail for a ton of money. 
$ 799.00 

yoshi rods.JPG (334923 bytes)   Yoshimura Super-rods
We seen Yoshimura rods used in big-bore Hondas with out issues.  We are aware of the on-going debate about alloy versus steel connecting rods, so continue as necessary.
$ 399.00 

golden rods 2.JPG (299147 bytes)   RC engineering Golden rods
You all know about these RC connecting rods, if not give a call someday.
$ 599.00

purple rods.JPG (313981 bytes)  Cycle X connecting rods
You will never break these rods.  Call for details !!!!!!!!
$ 1399.00

used valves.JPG (307861 bytes)  Manley race valves
These Manley valves are new, but were lapped and installed in a head ( never run)
STD intake and exhaust. 
$ 99.00 a set

used cover.JPG (985296 bytes) Finned starter cover
Um, its a starter cover with fins.
$ 99.00

mikuni1.JPG (363770 bytes)   mikuni2.JPG (365779 bytes)   mikuni3.JPG (373793 bytes)   mikuni4.JPG (354710 bytes)  Mikuni smoothbore's 
 29mm smooth bore's  ( 2 sets ) for Honda cb750 sohc's
Two sets of Mikuni smooth bore carburetors systems, because you may need parts someday.
$ 999.00

cafe alloy retainers.JPG (199718 bytes)cmcAlloy spring retainers
jNEW, alloy valve spring retainers. These spring retainers were used heavily in the 70's era and still used today.
If you are concerned with weight in your valve train, these alloy retainers are 39 grams less than stock retainers and 9 grams lighter than  Titanium retainers. 
Preferred 69-76 keeper style.
Used in conjunction with our super light, super flow valves and you will have a happy valve train.  
$ 69.00 per set  

cafe RC big block.JPG (215777 bytes)   RC engineering big block 
Vintage  RC engineering big block cylinder  ( 71mm bore ) 
Contact your favorite piston manufacture for some pistons.
$ 1399.00

cafe block off plate.JPG (204318 bytes)  Block off plate  
Stator cover block off plates were used  by drag racers and others when the charging system was not used.
$ 125.00

cafe ard mag electronic.JPG (228394 bytes)  ARD electronic ignition
This ARD electronic ignition is one of the best set ups from the olden days.
We really do not want to sell it, but nobody will buy it for !!!!!!!!!!!!!!!!
$1500.00

cafe vortex 1.JPG (260057 bytes)cafe vortex 2.JPG (228322 bytes)  j  sohc sidewinder exhaust
Check out the sidewinder exhaust from the old days. 
$ 199.00

cafe oil cooler.JPG (214028 bytes)jcOil cooler and adaptor 
Honda cb750 oil cooler ( Lockhart ) and adaptor as shown.
$ 125.00

cafe 4 into one1.JPG (231108 bytes)New, Old 4 into 1 Exhaust
Looks like this header might make some good power. Spigot mount. Chrome peeling a bit.
$ 149.00

dirt MAC.JPG (241401 bytes) Dirty, rusty 4 into 1 
Early MAC 4 into 1 exhaust for your Honda cb750.
Paint it, wrap it and use it.
Baffled.
$ 99.00 

Cafe rickman.JPG (230340 bytes)  Rickman stuff
We are told this is Rickman body work, We have the fairing and lowers ( will take a photo later)
Fits Honda cb750. Kinda beat up, but still kinda cool.
$$$$$$$$$$$$$   offers anyone    ????????

Cafe CF carb's.JPG (214275 bytes) Honda cb750 CR carbs
31mm Keihin CR specials 
$ 550.00

dcarbs.JPG (105387 bytes)  Dellorto race carb's / manifolds
These Dellorto carbs were on a Honda drag bike and were used heavily in the 70's era.
Or.............. use these on your vintage, period looking project.
Carb's and manifolds  $ 899.00s 

used pistons 1.JPG (304513 bytes) 71mm Venolia pistons
New
Venolia was one of the piston manufactures for RC engineering back in the days.
Pistons only.
$ 399.00 

usd pistons 2.JPG (203563 bytes)  71mm Venolia pistons
Same as above, but they have been run before ( looks like about ten miles or so ) look perfect.
Pistons only.
$ 325.00 

used pistons 3.JPG (344715 bytes)  73mm pistons and cylinder.
This piston and cylinder were removed from a high performance street bike. 
73mm
Arias pistons. ( modern pistons, with the latest technology)
Call for further details 
$ 899.00 

cafe 836cc pistons and cylinder.JPG (237055 bytes)  High compression pistons / cylinders
Arias pistons ( 12 1/2 plus comp.) and bored cylinder. ( 836cc)
Deglaze and install new Arias rings and go fast.
$ 499.00

 

 

 

**** UNDER HEAVY CONSTRUCTION ****

              

 Hit Counter