Pre-Owned High-Perf Parts

   BACK TO HOME PAGE           

                                                                                               n                                   

                        CALL FOR AVAILABILITY AND TO ORDER. # 715-356-7346

   Stroker crankshaft and golden rods
So, here is a Honda sohc Stroker crank and RC engineering golden rods. The rods are shorter and are designed to be used with this crankshaft. 
 
$ 1395.00

   900cc Honda cylinder 
This 66.70 bore cylinder has been sleeved, surfaced, glass beaded, heli coiled and painted.
These cylinders are nice because you will not need to bore your upper engine case. 
You will need to contact your favorite piston manufacturer for some pistons.
$ 499.00 

   ARD mag
Check out the nice ARD mag for your vintage Honda sohc project. 
$ 799.00

ARD mag
Another ARD mag.
$ 799.00

   ARD mag parts
One more ARD mag for parts. See anything you need ?

  73mm Big-Bore cylinder
This Big-Bore cylinder has been glass beaded, surfaced, sleeved for 73mm pistons. 
You will need to contact your favorite piston manufacture for some pistons.
$ 499.00 

      71mm Big-Bore cylinder
Glass beaded, surfaced and sleeved for 71mm pistons.
You will need to contact your favorite piston manufacture for pistons.
$ 499.00 

     Carrillo connecting rods 
These Carrillo connecting rods retail for a ton of money. 
$ 799.00 

   Yoshimura Super-rods
We seen Yoshimura rods used in big-bore Hondas with out issues.  We are aware of the on-going debate about alloy versus steel connecting rods, so continue as necessary.
$ 399.00 

   RC engineering Golden rods
You all know about these RC connecting rods, if not give a call someday.
$ 599.00

  Cycle X connecting rods
You will never break these rods.  Call for details !!!!!!!!
$ 1399.00

  Manley race valves
These Manley valves are new, but were lapped and installed in a head ( never run)
STD intake and exhaust. 
$ 99.00 a set

  Cir-cycle adjustable struts
Vintage adjustable rear struts made by Cir-cycle many moons ago.
Shortest length is 11 1/4 and can be adjusted longer as needed. 
$ 49.00 

Finned starter cover
Um, its a starter cover with fins.
$ 99.00

           Mikuni smoothbore's 
 29mm smooth bore's  ( 2 sets ) for Honda cb750 sohc's
Two sets of Mikuni smooth bore carburetors systems, because you may need parts someday.
$ 999.00

cmcAlloy spring retainers. 
NEW, alloy valve spring retainers. These spring retainers were used heavily in the 70's era and still used today.
If you are concerned with weight in your valve train, these alloy retainers are 39 grams less than stock retainers and 9 grams lighter than  Titanium retainers. 
Preferred 69-76 keeper style.
Used in conjunction with our super light, super flow valves and you will have a happy valve train.  
$ 69.00 per set 

   RC engineering big block 
Vintage  RC engineering big block cylinder  ( 71mm bore ) 
Contact your favorite piston manufacture for some pistons.
$ 1399.00

  Block off plate  
Stator cover block off plates were used  by drag racers and others when the charging system was not used.
$ 125.00

  ARD electronic ignition
This ARD electronic ignition is one of the best set ups from the olden days.
We really do not want to sell it, but nobody will buy it for !!!!!!!!!!!!!!!!
$1500.00

  j  sohc sidewinder exhaust
Check out the sidewinder exhaust from the old days. 
$ 199.00

   New, old  4 into 1  header
Looks like this header might make some good power. Spigot mount. Chrome peeling a bit.
$ 149.00

  Rickman stuff
We are told this is Rickman body work, We have the fairing and lowers ( will take a photo later)
Fits Honda cb750. Kinda beat up, but still kinda cool.
$$$$$$$$$$$$$   offers anyone    ????????

Honda cb750 CR carbs
31mm Keihin CR specials 
$ 550.00

  Dellorto race carb's
These Dellorto carbs were on a Honda drag bike and were used heavily in the 70's era.
Carbs only.
$299.00 

71mm Venolia pistons
New
Venolia was one of the piston manufactures for RC engineering back in the days.
Pistons only.
$ 399.00 

  71mm Venolia pistons
Same as above, but they have been run before ( looks like about ten miles or so ) look perfect.
Pistons only.
$ 325.00 

  73mm pistons and cylinder.
This piston and cylinder were removed from a high performance street bike. 
73mm
Arias pistons. ( modern pistons, with the latest technology)
Call for further details 
$ 899.00